Ninebot Kickscooter E22

The Ninebot KickScooter E22 is an electric scooter with an integrated frame design, stylish yet simple.

From $999.00

Please Note: Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-scooters, e-bikes and e-boards (including where e-scooters, e-bikes and e-boards can legally be used and whether e-scooters, e-bikes and e-boards need to be registered with the relevant road traffic authority).  Any user of this product must ensure that that they check and abide by their local by-laws and use responsibly.  Ride with caution and always wear a helmet and protective gear when riding your e-scooter, e-bike and e-board. Before riding your e-bike, e-scooter and e-board ensure the bolts are tight and the battery is charged.

This Kickscooter lets you travel up to 22km at 20km/h. It is light, only weighing 13.5kg and easily foldable. This scooter possesses ultimate safety with a dual braking system. This model has a 2.5W high-brightness LED light. It only takes around 3 hours to be fully charged and has 3 different riding modes. The Ninebot Kickscooter E22 has a 15% hill grade and a 100kg load. It comes with a bell.

Please Note: Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-scooters, e-bikes and e-boards (including where e-scooters, e-bikes and e-boards can legally be used and whether e-scooters, e-bikes and e-boards need to be registered with the relevant road traffic authority).  Any user of this product must ensure that that they check and abide by their local by-laws and use responsibly.  Ride with caution and always wear a helmet and protective gear when riding your e-scooter, e-bike and e-board. Before riding your e-bike, e-scooter and e-board ensure the bolts are tight and the battery is charged.

Specifications
Net Weight
13.5kg
Dimensions
1130x420x360mm
Max Speed
20km
Range
22km
Gradeability
15°
Rated power
300W
Tire Size
9 inches
Tire Type
Non-pneumatic tires
Payload(Kg)
100
Tail light
Break light
Driver
Front
Braking
Electronic brake+foot brake
Water proof
IPX4

Brand

Reviews

There are no reviews yet.

Be the first to review “Ninebot Kickscooter E22”

Your email address will not be published. Required fields are marked *

Q: How to set up the E22?

  1. You need to download the Segway-Ninebot App on your phone. This can be done by scanning the QR code inside the user manual.
  2. Turn on the scooter by pressing the power button on Control Panel once.
  3. Turn on Bluetooth on phone.
  4. Follow the instructions on APP to pair E22 with APP to unlock the speed limit.

 

Q: What I can do with the Segway APP?

A: You can register multiple scooters with one account, lock your scooter, track your past rides, track the health of your scooter, etc

 

Q: Why is my scooter at low speed and beeps?

A: You need to activate your scooter on Segway APP before you can unlock a higher speed.

 

Q: How do the breaks work on E22?

First, slow down by releasing the throttle; Squeeze the electronic brake on the left and stamp the fender with the foot at the same time for a sudden brake.

 

 

Q: How do the lights work?

A: Short press the power button on Control Panel once to turn on the light.

Q: How do you move on E22?

  1. Stand on the footrest with one foot and push off with another foot to start gliding.
  2. Put your other foot on the footrest to keep both feet stable. Press the throttle on the right hand to speed up when you are balanced.

 

Q: Can I ride by pressing the throttle only? Without using my foot to glide.

A: No, for your safety, the motor will not engage until E22 reach 4km/hr

 

Q: Can I ride at a constant speed?

A: Yes, you can select Cruise mode in Segway APP, please follow the instructions on APP closely.

 

Q: How many speeds modes are there on the E22, what do they do?

A: There are three modes. Double press the power button to change mode.

  1. Red “S” icon: Sport mode (maximum power/speed).
  2. White “S” icon: Standard mode (moderate power/speed).
  3. No “S” icon: Speed limit mode (minimum power/speed).

 

Q: What is the recommended age for riding E22?

A: 14 years +

 

Q: What is the recommended height to use E22?

A: 130-200cm

 

Q: What is the load of an E22?

A: 30-100kg

 

Q: How far can you go on an E22?

A: Up to 22km.

 

Q: How heavy is an E22?

A: 13.5kg

 

Q: How long does it take to charge an E22?

A: Charging time depends on the battery status; it takes up to 3.5 hours for a full charge from zero percent.

 

Q: How fast can E22 go? *under good road condition and good weather condition

A: Up to 20km/hr

 

Q: Are E22 waterproof?

A: E22 has an IP rating of IPX4, which means they can handle rain and splashes.

 

Q: How do you reset the scooter?

  1. Turn the unit ON.
  2. Hold the throttle lever and the brake lever all the way down and keep them down (you may need to ask someone to help with an additional hand)
  3. Turn the unit OFF
  4. Release the throttles
  5. Turn the unit ON

 

Q: What do I do if I see a number appear or a tool sign appear on the scooter screen?

A: Contact after-sales with the serials number of your scooter, purchase receipt, and a picture or short video of the error.

 

 

Please Note: Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-scooters and e-boards (including where e-scooters and e-boards can legally be used and whether e-scooters and e-boards need to be registered with the relevant road traffic authority).  Any user of this product must ensure that that they check and abide by their local by-laws and use responsibly.  Ride with caution and always wear a helmet and protective gear when riding your e-scooter and e-board.

Choose a retailer: